ONLINE AUCTION. Ends 3.1.17 . To view full details, please go to www.govdeals.com and enter 297-1723 in the QAL (Quick Asset Lookup) search box located on the homepage. AUCTION INCLUDES ALL SQUARE D EQUIPMENT INSIDE BUILDING INCLUDING SQUARE D MOTOR CONTROL CENTER (MCC) MODEL 6 IS 600 AMP RATED AS DESCRIBED BELOW & SHOWN IN PHOTOS:

The main disconnect outside has no cover so most likely not in good condition. • inside fused disconnect is at least a 3 phase 480 volt but probably 600 volt rated (currently has 225 amp fuses installed) • the Sq D transformer is 25KVA rated, cat# 25S3HFCU • the Sq D panel is a NQOD30L225CU with a few breakers installed • Looks like possibly a Sq D lighting contactor above door • the Sq D MCC (Motor Control Center) is 600 amp rated, with 5 sections. Some buckets are labeled spare but the rest used to be active, please see the picture of #2 seepage bucket (opened), it has associated parts still installed. Other buckets are labeled, see below: - Seepage Pump P-1 Control Panel - 120 V Control for RVSS P-1 - Transformer - Surge Suppressor - Seepage Pump No.1 - Remote Control Panel - 120 V Control for RVSS P-2 - Seepage Pump No.2 - Metering - MCB (main circuit breaker)

BUYER MUST REMOVE/DISCONNECT ALL SQUARE D EQUIPMENT INSIDE BUILDING. PROVIDE EQUIPMENT TO LOAD SUCH AS HOIST, GANTRY CRANE, FORKLIFT, ETC. UNPAVED ACCESS ROAD. PICK UP ONLY MONDAY THRU THURSDAY BETWEEN 8:00AM & 4:00PM.

LIABILITY RELEASE MUST BE SIGNED AND PROOF OF INSURANCE IS REQUIRED: $300,000 GENERAL LIABILITY, $300,000 AUTO AND WORKERS COMP. MUST NAME THE S FL WATER MANAGEMENT DISTRICT AS ADDITIONAL INSURED. SEE G350A Equipment Removal Requirements Draft.docx ATTACHMENT FOR FURTHER DETAILS.

LOCATED REMOTE SITE G350A IN HENDRY COUNTY (DOWN A SHORT WAY FROM G508 WHICH IS ADDRESS LISTED WITH THIS POSTING). SEE PHOTO OF ACTUAL BUILDING ITEMS LOCATED IN. NO FACILITIES. BEWARE OF POTENTIAL WASPS.

PROPERTY MAY BE INSPECTED ON WEDNESDAY, FEBRUARY 1ST AT 9:00 AM. BY SCHEDULED APPOINTMENT ONLY! Please contact: Karen Kempf, Phone: (561) 682-2113 or e-mail: kkempf@sfwmd.gov

CONDITION: EQUIPMENT HAS NOT BEEN TESTED AND MOST ITEMS FOR SALE ARE USED AND MAY CONTAIN DEFECTS NOT IMMEDIATELY DETECTABLE. ALL EQUIPMENT ARE SOLD IN "AS-IS" CONDITION. WE STRONGLY RECOMMEND YOU INSPECT EQUIPMENT BEFORE BIDDING!

Sylvia Electrical Contracting is a full service electrical company specializing in residential, commercial and industrial wiring for heat, light, power, data and communication.  Our electricians our licensed and insured.  We offer competitive pricing and free estimates.  Sylvia Electrical has A+ rating with the BBB.  See how are services can help you.  Visit our webiste at www.sylviaelectrical.com.

New Branch Circuit

Home Rewiring

Panel Upgrade

Trouble Shooting

Smoke Detectors

Landscape Lighting

Recessed Lighting

Motor Installation

Wall Mount Plasma T.V Installation

120/240 Volts

277/480 Volts

ELECTRICIANS/LIGHTING TECHNICIANS

Centrical Inc. is a well established lighting and electrical company serving the Northeastern and Central United States.  We are offering immediate, full time employment to experienced electricians and lighting technicians in Rochester, NY.

Our technicians install, retrofit and service LED and Florescent lighting systems in retail, industrial and commercial settings.

Lighting Technician;

• 3-5 years electrical experience or equivalent training

• Starting salary $23k - $32k

Electrician/Forman;

• 5 + years electrical experience

• Proven ability to lead

• Proven customer service skills

• Solid, reliable work ethic

• Control systems experience a plus

• Starting salary $33k - $46k

Benefits include;

• Paid Time Off

• Paid Holidays

• 401K

• Health Care Contribution
  
  

Some travel required. Company vehicles are provided.

All applicants must have a valid, clean driver’s license. Pre-employment drug screen and 7-year background check are required.

Please email resumes to Lisa D’Aprile at LDaprile@centricalinc.com, or fax to 585-581-1034

Centrical, Inc is an equal opportunity emplo

Our client, a commercial electrical, sign & lighting expert, is seeking a Licensed Journeyman or Master Electrician to add to their team. Since 1986, they have continued to grow and hire only the best employees to provide unparalleled service to their customers. In this role, you would be responsible for servicing, troubleshooting, and performing new installations in a commercial environment.

Qualified candidates must be a licensed electrician (Journeyman or Master). The selected candidate must be able to pass a drug screen, background check, and have a clean driving record.

This is a direct hire position and you would be offered the following excellent benefits: Company truck, gas card, cell phone, health insurance, retirement plan, paid days off.

Custom engraved selector switch plates, legend plates, conduit/valve­ tags, outlet wall plates, recepticle plates, name tags, labels, tags and signs. Standard selector/switch­ plates: Cutler Hammer, Allen Bradley, Square D, Eaton, G.E. as well as custom sizes and colors. Very reasonable rates. Made Fast, Shipped Fast.

Searching for the best Northern Kentucky electrician? Choose Rose Brothers & Sons Electric! Based in Florence Kentucky, we've been serving the Northern Kentucky area for years. Our services range from small electrical repairs to large electrical contracting and construction projects. For top of the line electrical work in Northern Kentucky, call Rose Brothers!

Custom engraved selector switch plates, legend plates, conduit/valve­ tags, outlet wall plates, recepticle plates, name tags, labels, tags and signs. Standard selector/switch­ plates: Cutler Hammer, Allen Bradley, Square D, Eaton, G.E. as well as custom sizes and colors. Very reasonable rates. Made Fast, Shipped Fast. 30% off entire order for new customers.

http://plc-training.org/ details the niche topic under industrial electrician; PLCs (Progammable Logic controllers) and what employers need in respect to best practice PLC training for their industrial electricians and engineers.

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.